1. Size of Tent and

2. Size of your pack.

Except for these, some other factors can be effective for properly attaching to the best 4 person tent to the backpack. So, keep scrolling until you find the right way to attach the tent with the hiking backpack straps.

Is There Any Risk Associated With Packing Your Tent Outside the Backpack?

Yes, there are some risks associated with packing your tent outside the backpack. When the tent is hanging on your backpack, it can expose it to hostile surroundings. For example, when you go through the woods, there are chances that it could be torn by the peeking branches. And if you don’t tie it properly, the tent may untie and fall off the rucksack. And you might not even notice it. Therefore, attaching your backpack correctly is super important to keep everything safe and secure. However, if you can secure the knots properly, the chance will be less.

So, if the tent is attached on the outside with your backpack, the following things may happen-

It can ruin the tent if you go through a bushy or thorny area with thorns or the woods. The branches could ruin the tent.

• The tent can untie and fall off the backpack.
• You may lose your tent if you overlook the incident.
• If fallen, the tent can be damaged.

So, how can you prevent it from being damaged? You can follow the rules here-

● If you want to save some backpack space and hang your tent outside, attach it properly. (full process given below)

● Keep the tent inside a well-knitted bag to protect it from sharp objects.

There are five steps involved in how to attach tent to backpack.

Step 1: Preparing the Tent

It’s where the work begins. It would help if you started from the beginning. Hence, start with preparing your tent.

Step 2: Pick a dry place

Choose a dry place to fold the tent and ensure it’s entirely dry before folding. Otherwise, a wet tent will add weight to the load. Additionally, stuffing the bag with a wet tent is difficult.

Step 3: Spread the tent on the ground.

Lay your tent flat on the dry ground. Gather the poles and tie them together. For the poles, you can use a separate bag. After that, place them on the border of the tent and roll them together until you reach the end.

Step 4: Keep the sides aligned when rolling.

When rolling, make sure the poles are aligned with the side of the tent. Otherwise, the tent will be unevenly rolled and make it difficult for you to put inside the bag.

Step 5: Put the tent inside the tent bag.

Now keep the tent inside the dedicated tent bag. Folding the bag inside out halfway will make it easier to slide in. Then seal the bag and strap it with your backpack.

Now, the tent is prepared to be carried along with you. But where are you going to attach it? Should you tie it with the loops on backpack straps? Or should you load it on the backpack? Let’s find out in the next section.

Where to Attach Your Tent?

There are primarily five options to carry or attach the tent with your backpack. Those areas below-

1. You can tie or strap the tent across the bottom of your backpack neatly to hang from there and strike your back or leg. Though it will stress your spine when the backpack has excess weight. Therefore, only carry the tent bag when the rucksack is light, and you can carry some additional weight.

2. Tie it vertically on the back of the rucksack. This way, the weight is distributed on both sides of the shoulders. However, it can pressure your spine if the bag is heavy.

3. Stack it on the top of the backpack and get some support from your shoulder. The weight of the tent is evenly allocated in this condition. If the backpack is heavy, you can do this instead of hanging it at the bottom.

4. Hanging the tent on one side of your backpack is another option. However, it can put an asymmetric load on one side of your body. Therefore, you should only carry the tent when the backpack is heavy on one side.

5. Lastly, you have the most common option to keep it inside your bag, and you won’t have to worry about anything then.

Not all options are suitable for a particular situation. Therefore, you have to consider which one is preferable for your condition and decide accordingly.

Now move to attach it to the backpack as you have decided where you want to strap your tent.

I) Tie the Tent with Backpack’s Daisy Chain

Your backpack might have a daisy chain. A backpack daisy chain is a series of loops sewed to the backpack. These loops come in handy when you want to have to hang extra gears on your backpack. You can utilize them to clip the tent as well. If your tent bag has additional straps, tie them with the backpack attachment straps. And you are good to go. The most amazing fact here is the tent remains in the loops even if it gets loose. However, ensure that the tent is properly secured to the backpack to avoid getting loose in the middle of trekking.

II) Use Backpack’s Compression Straps

If the backpack doesn’t have daisy loops, you can use the compression straps of your backpack to attach the tent without any tent bag straps. Make sure that they are rigid to hold the tent for a long time. As these straps generally are at the side of the backpack, you have to balance out the weight proportion on both sides of your body. Use two compression straps for a better grip. Also, secure the tent properly by connecting and tightening the buckles.

III) Own an External Frame Backpack

External frame backpacks have an added compartment for storing tents or sleeping pads. These sturdy bags have rigid construction for holding excessive loads. They make it easy to carry the load for long distances and distribute the weight evenly. So, you do not worry about packing a hiking backpack.